C-150Smooth Medium-Grade Flake for Uniform-Spray Protective Systems
C-150 delivers a tighter particle-size distribution around a 140 μm median, producing a smoother cured-film surface than C-90 while retaining strong barrier performance. Ideal where finish quality and spray uniformity are as important as protection.
Key Specifications
About C-150
C-150 is a narrow-distribution C-glass flake with 75% of mass falling between 300 μm and 45 μm, a D50 of 140 μm, and 5 ± 2 μm thickness. The tighter PSD — compared with C-90 — means fewer coarse outliers, which translates to a visibly smoother cured-film surface and improved spray consistency through airless equipment. C-150 is the preferred grade for mid-range protective coatings where appearance, recoatability, and sealing performance matter equally: architectural anti-corrosion coatings, floor topcoats, and chemical-contact sealers.
Available Variants
PSD Profile
Full Specifications
| Median Diameter (D50) | 140 μm |
|---|---|
| Nominal Thickness | 5 ± 2 μm |
| Bulk Density | 0.5 g/cm³ |
| Typical Aspect Ratio | 80–280 : 1 |
| Glass Type | C-Glass (calcium-aluminosilicate) |
| Surface Treatments | N (none) · V (vinyl-ester) · E (epoxy) |
| Recommended Loading | 18–28 wt% |
| Recommended DFT | 200–400 μm |
| Surface Finish | Smoother than C-90 — suitable for decorative topcoats |
| Packaging | 20 / 25 kg moisture-proof paper bag |
| MOQ | 1,000 kg |
| Lead Time | 2–4 weeks from order confirmation |
| Trade Terms | FOB Tianjin · CNF · CIF |
Typical Applications
Recommended Coating Systems
- • Epoxy mid-range protective systems (use C-150E)
- • Vinyl-ester chemical-contact topcoats (use C-150V)
- • Two-coat systems where C-150 serves as the appearance-grade topcoat over C-90 primer
- • Polyester gel-coats with barrier enhancement
Related Products
Request C-150Sample & Quotation
Free sample kits shipped worldwide — you only cover freight, which may be discounted on your first order. Typical MOQ 1,000 kg; lead time 2–4 weeks.